The YMP-380M is a 300 kg holding force, monoblock, high-stability surface-mounted electromagnetic lock operating at 12/24 V DC. It is ideal for securing small interior doors used to separate indoor spaces; however, when multiple units are installed at appropriate points, it may also be suitable for larger doors. Thanks to its narrow design, it can be installed into a 40 mm rectangular hollow section.
The magnet is rated IP68 for water and dust resistance, making it suitable for both indoor and outdoor installation.
Electromagnetic locks provide an ideal solution for all types of doors. This type of lock is vandal-resistant and contains no wearing parts, ensuring safe and reliable long-term operation.
ATTENTION! The electromagnetic lock must always be installed on the internal, protected side to prevent unauthorized access to the mounting points and wiring.
| Voltage (V) | 12 / 24 V |
|---|---|
| Voltage type | DC |
| Maximum current consumtion (A) | 500 mA (12V DC) |
| Power consumption (W) | 6 W |
| Power comsumption on opening (W) | 0 W |
| Power comsumption on closing (W) | 6 W |
| Holding force (N) | 2942 N |
| Holding force (kgf) | 300 kgf |
| Operating modes | needs power to close |
| Opening possibilities | controlled electrical signal |
| Type of control | power cut |
| Behaviour (in case of power off) | Fail-safe |
| Field of use | outward opening, interior door, entrance doors, plastic doors, aluminium doors, wooden doors |
| Installation area | indoor, outdoor |
|---|---|
| Mounting | surface mounted, with screw |
| Package contents | Electromagnet with factory mounting possibilities, armature plate, screw set, hex key |
| Dimensions | 255 x 36 x 25 mm |
| Dimension of armature plate | 180 x 39 x 13,3 mm |
| Mortise dimension | 215 x 36 x 25 mm |
| IP rating | IP68 |
| Environmental temperature | -30°C ~ +66°C |
| Humidity tolerance (non-condensing) | >90% |
| Gross weight | 1,6 kg |
| Warranty | 12 months |
| Certificates | CE |
| Manufacturer | YLI |
| Product category | A |